Nachrichten

Der Produktionsprozess von PP(3)

seine Formel wurde in die Vereinigten Staaten gebracht (seine Formel wurde in die Vereinigten Staaten gebracht) seine Formel wurde in die Vereinigten Staaten gebracht. seine Formel wurde in die Vereinigten Staaten gebracht. seine Formel wurde in die Vereinigten Staaten gebracht, seine Formel wurde in die Vereinigten Staaten gebracht, which is sent to the upper part of the downcomer to pass through the cyclone separator, and the powder is collected in the downcomer. The reaction gas is circulated by the centrifugal compressor through the external pipeline, and the reaction heat [...]

Der Produktionsprozess von PP(2)

Process features: (1) no solvent is added in the system, propylene monomer is polymerized in liquid phase in the kettle reactor, and ethylene propylene is polymerized in gas phase in the fluidized bed reactor; (2) simple process, less equipment, less investment, low power consumption and production cost; (3) polymerization is carried out in the kettle stirring reactor (Hypol process) or the loop reactor (Spheripol process) Random copolymerization and block copolymerization were carried out in a stirred bed reactor.The typical [...]

Der Produktionsprozess von PP(1)

Lösungspolymerisation Prozessmerkmale: (1) unter Verwendung eines geradkettigen Kohlenwasserstoffs mit hohem Siedepunkt als Lösungsmittel, Betrieb bei einer Temperatur über dem Schmelzpunkt von Polypropylen, alle erhaltenen Polymere werden im Lösungsmittel gelöst und gleichmäßig verteilt; (2) high temperature gas extraction method is used to evaporate and remove the solvent to obtain molten polypropylene, and then extrude and granulate to obtain granular products; (3) only Kodak company in the United States is the manufacturer.Liquid phase bulk method The liquid-phase bulk [...]

Der Produktionsprozess von PP

Polypropylene resin is one of the four general thermoplastic resins (polyethylene, polyvinyl chloride, polypropylene, polystyrene). It is produced by polymerization with propylene as raw material and ethylene as comonomer. The production process of polypropylene mainly experienced several development stages, such as solvent method, solution method, liquid-phase bulk method (including liquid-phase gas-phase combination) and gas-phase method. In the world, the process methods used to produce polypropylene are divided into the following categories: solvent method, solution method, liquid-phase bulk method (including liquid-phase [...]

The characteristic of PP

PP is a colorless, odorless, nontoxic and translucent solid substance. Polypropylene (PP) is a kind of thermoplastic synthetic resin with excellent properties. It is a colorless and translucent thermoplastic light general plastic. It has chemical resistance, heat resistance, electrical insulation, high-strength mechanical properties and good high wear-resistant processing performance, etc., which makes polypropylene rapidly developed and applied in many fields such as machinery, automobile, electronic and electrical appliances, architecture, textile, packaging, agriculture, forestry, fishery and food industry since it [...]

Tägliche Pflege der Dermis

1. Nach langjährigem Kontakt mit der Außenwelt, Das Leder produziert Feuchtigkeit im Inneren. Es sollte zum Trocknen immer an einem belüfteten Ort aufbewahrt werden, um die Vermehrung von Bakterien zu verhindern. Es kann auch mit einer angemessenen Menge an feuchtigkeitsbeständigen Perlen gelagert werden. 2. If the leather gets damp inadvertently, it should be absorbed by dry cloth, and then placed in a cool and ventilated place. It should be naturally dried in the shade. It should not be placed in the [...]

Der Unterschied von vier Arten von Cortex

Schaffell Die Poren auf der Lederoberfläche sind abgeplattet, klein und in Fischschuppen angeordnet. Produktionsfähigkeiten von Kraftpapier, mehrere Poren bilden eine Gruppe. Das Leder ist weich und elastisch. Schweinsleder Die Poren auf der Oberfläche von Schweinsleder sind rund und dick, die dazu neigen, in das Leder einzudringen. The pores are generally arranged in a group of three pores. There are many small triangles on the surface of pigskin, with poor elasticity and thick skin. cowhide The surface pores of cattle hide are round, compact [...]

Der Unterschied von vier Arten von Leder

Verschiedene Lederarten haben unterschiedliche Eigenschaften und Verwendungszwecke. Zum Beispiel, Rindsleder mit dünner Oberfläche und hoher Festigkeit eignet sich am besten für die Herstellung von Lederschuhen; Schafsleder ist leicht, dünn und weich, welches der ideale Stoff für Lederbekleidung ist; pig leather has good air permeability, water permeability and vapor permeability.Pigskin The pores on the surface of pigskin are round and thick, which are inclined to extend into the leather. The pores are arranged in a group of [...]

Identify leather and synthetic leather

With the above four basic identification methods, we can compare and identify leather and synthetic leather (artificial leather and synthetic leather refer to products with some characteristics of natural leather produced by different resin materials and processing aids through different processing processes, also known as artificial leather and imitation leather; there is no clear and unified definition between artificial leather and synthetic leather, so there are also some people They are called synthetic leather without distinction. The author thinks [...]

Identifikationsmethode für Leder

Augenansicht Es gibt deutliche Poren und Muster auf der Lederoberfläche, symmetrische feine Poren auf der Rinderhaut, dicke und spärliche Poren auf der Yakhaut, und Fischschuppenporen auf der Ziegenhaut. Whether leather surface has pores or not is an important feature to identify leather authenticity.Nasopharynx All leather has the smell of leather, while synthetic leather has a strong plastic smell. light Tear off a little fiber from the back of real leather and artificial leather. When ignited, artificial [...]